Flow Meter Avery Hardoll

Sering disebut solar meter yang banyak dipakai di dunia industri manufacture maupun transportasi. Untuk aplikasi didunia industry fuel oil meter banyak di aplikasikan untuk proses produksi steam pada boiler, pada termo oil yang menggunakan sistem burner, dan juga pada proses painting yang terdapat proses drying yang menggunakan burner dengan bahan bakar solar. Dan juga dipakai di utility penerangan yang mana memerlukan Genset.

Begitu juga untuk industry transportasi seperti pada pool atau pada SPBU Pertamina ataupun di kalangan yang sering digunakan untuk repair kapal atau speed boat. Begitu luasnya penggunaan fuel flow meter untuk bahan bakar ini baik untuk bahan bakar kerosine, fuel oil, medium fuel oil bahkan heavy fuel oil, sehingga memaksa para pabrikan yang memproduksi fuel flow meter menciptakan berbagai jenis yang disesuaikan dengan aplikasi dilapangan.

Sedangkan jenis flow meter berdasarkan cara kerja fuel flow meter yang banyak beredar adalah jenis Oval Gear, Rotary, Swirl, Screw, piston, vane dan lainnya.

Deskripsi
Ulasan (0)

Deskripsi

FEATURES & BENEFITS Flow Meter Avery Hardoll

Avery-Hardoll BM Series flowmeters are precision made, positive displacement, liquid measuring
instruments that maintain the higest level of accuracy over a lifetime of operation. Simplicity of design and
accuracy has resulted in the Avery-Hardoll BM Series meters to being the most preferred meters by aviation
fueling operators and airlines in internatonal markets.*
*According to the Global Aviation Fueling Survey 2015

DIMENSIONAL DRAWINGS Flow Meter Avery Hardoll
MECHANICAL METER ASSEMBLY DIAGRAM AND CROSS-SECTION

AVAILABLE MODELS
BM Series bulkmeters are manufactured in three basic sizes with different ratings identified by a series number.
The series numbers, sizes, flow rates, and a brief description of each series of meter are shown below.

BULKMETER MAIN COMPONENTS

The BM Series bulkmeters consist of three main
assemblies: the manifold, body assembly and
rotor assembly
The higher rating of the larger meters is achieved
by bolting two or three body capsules together
and fitting double or triple rotor assemblies with a
larger manifold to suit
A calibrating mechanism and mechanical register
are also attached to the front end cover
The calibrating mechanism can be replaced by
a front cover incorporating a pulse transmitter
when required for electronic systems, such as
MASTERLOAD II™ or MASTERLOAD III™ registers

ELECTRONIC REGISTER CALIBRATION

While conventional meters are calibrated at only one
flow rate, MASTERLOAD II™ and MASTERLOAD III™
calibration is corrected at a range of flow rates to provide
the highest level of accuracy. With a multitude of
calibration points across the full flow range, the system
allows the user the flexibility to configure
each system to suit the requirements of their
specific application.

MECHANICAL CALIBRATION

Calibration adjustment is stepless, with no necessary gear
changing. All meters are tested at a range of flow rates
before dispatch. Test certificates available upon request.
•• Fluid used for testing: Odorless kerosene
•• Specific gravity: at 60/60°F, 15/15°C = 0.8
•• Viscosity at 60°F, 15°C = 2.4 centistokes.

WORKING SPECIFICATIONS

•• Maximum working pressure: 150 psi (10.3 bar)
•• Test pressure: 300 psi (20.7 bar)
•• Temperature range: -28°C to 100°C
•• Volume per revolution:
– 2.27 litres (single capsule)
– 4.54 litres (double capsule)
– 6.82 litres (triple capsule)
•• Typical accuracy: +/- 0.05%
•• Repeatability: 0.02%

Harga Flow Meter Solar Avery Hardoll

https://flowmeterjakarta.com/product/distributor-flow-meter-avery-hardoll-cm-series-4-capsule/