Jual Flowmeter Liquid controls MS Series

Description

Harga Flowmeter Liquid controls MS Series

MS-Series Positive Displacement Flow Meters:

 
  MS MSAA MSA MSB MSC
Pressure Rating      150psi / 10.5 BAR 275psi / 19 BAR 300psi / 21 BAR 720psi / 50 BAR 1,440psi / 100 BAR

 

Available Models Size Maximum Nominal Flow Rate
MS, MSAA, MSA, MSB or MSC 7

2″

100 gpm / 380 L/min
MS, MSAA, MSA, MSB or MSC 15

3″

200 gpm / 760 L/min
MS, MSAA, MSA, MSB or MSC 30

3″

350 gpm / 1,325 L/min
MS or MSAA 40

3″

450 gpm / 1,700 L/min
MS, MSAA, MSA, MSB or MSC 75

4″

700 gpm / 2,650 L/min
MS, MSAA, MSA, MSB or MSC 120*

6″ or 8″

1,000 gpm / 3,785 L/min

*Rated to 1,200gpm with 8″ flanges

Materials of Construction
  • Meter housing:
    Steel or stainless steel (epoxy coated steel available for aviation and other applications)
  • Meter element and rotors:
    Cast aluminum (other metalurgies available including cast iron and stainless steel)
  • Internal components:
    Aluminum, Ni-Resist, stainless steel, iron
  • Seal materials
    Buna-N, Viton®, PTFE
  • Bearings
    Carbon, PTFE, Ni-Resist

Liquid Controls MS-Series meters meet NTEP (NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications.

Design Features

Liquid Controls steel-case MS-Series rotary motion positive displacement (PD) meters offer the ultimate in flow measurement accuracy for bulk custody transfer of petroleum products, aviation fuels, LPG, crude oil, petrochemicals, and a broad range of industrial liquids. MS-Series meters incorporate a unique design, presenting minimal intrusion in a flowing stream of liquid, as well as minimal pressure drop through the meter.

Liquid Controls MS-Series meters consist of an outer spherical steel-case shell with flanged inlet and outlet ports. The shell houses a traditional LC metering element that employs three rotating and synchronized rotors. These rotors accurately segment flow into a precise volume of liquid for each revolution, with no metal-to-metal contact inside the measuring chamber. Hydraulic sealing between the rotors and the measuring chamber wall is accomplished by a stationary boundary layer of liquid—not by the wiping action of mechanical parts—thereby ensuring sustained accuracy, long service life with minimal wear, and low pressure drop suitable for operation on gravity low or pump pressure.

All MS-Series spherical shells are constructed of steel or stainless steel. Epoxy coated versions are available for aviation applications. Metering elements are available in metallurgies and seal materials suitable for a wide range of petroleum, petrochemical, and industrial applications.

UA-72056598-1

Reviews

There are no reviews yet.

Be the first to review “Jual Flowmeter Liquid controls MS Series”

SKU: 45 Category: