Actuator Siemens SKP 15.000E2

Deskripsi

Actuator Siemens SKP 15.000E2

Actuators for gas valves SKPx5… Actuator Siemens SKP 15.000E2
•Open / closed safety shutoff function conforming to EN 161 in combination
with valves supplied by Siemens
 Damped opening (rapid closing)
Very low power consumption
 Suitable for use with gases of gas families I…III
 Optionally with / without end switch (factory-set)

The SKPx5 and this Data Sheet are intended for use by OEMs which integrate the
actuators in their products.

Actuators SKPx5 in general 
The combination of actuator and valve provides the following functions:
– Safety shutoff valve (SKP15)
– Safety shutoff valve with gas pressure governor (SKP25, SKP55, SKP75)
The electrohydraulic actuators together with the valves are designed for use with gases
of gas families I…III and air. They are used primarily on gas-fired combustion plant. The
actuators open slowly and close rapidly. The actuator can be supplied with end switch
(for indicating the fully closed position). For information about valve sizing, refer to the
«Valve sizing chart» in the Data Sheet of the relevant valve.
If the actuators are used with gases other than those of gas families I…III, Siemens AG
assumes no responsibility for the actuator’s durability and life expectancy.
All types of actuators can be combined with any of these valves.

SKP15
The electrohydraulic operated gas fittings SKP15 together with VGx valves works
exclusively as a safety shutoff valve (Open / Closed). They are used primarily on gasfired
combustion plant. The actuators open slowly and close rapidly.
A valve stroke indication at actuator can only be delivered with end switch.

SKP25
The SKP25 operates with a gas pressure governor and controls the gas pressure
according to the setpoint preselected with the setpoint spring or air pressure signal.
Its field of use is primarily forced draft gas burners

 STEAM TRAP CLASS 16K
https://flowmeterjakarta.com/product/jual-water-meter-amico-2-inch-lxsg-50-e/