Jual Flow meter Aquametro VZO Mechanical Oil Flow Meters

Deskripsi

Jual Flow meter Aquametro VZO Mechanical Oil Flow Meters

Product Information Aquametro Flow meter  VZO 15 – VZO 40 :

Oil meters with mechanical roller counter, and with BSP Threaded Fittings

Not approved for resale use Jual Flow meter Aquametro VZO Mechanical Oil Flow Meters

Reed switch RV or inductive pulser IN (NAMUR IEC 60947-5-6) are also available. Please email for prices and datasheet if required

Suitable for Fuel Types;

• Heating Fuel, Extra Light / Light / Medium / Heavy (DN20 or above)
• Kerosene
• Naphtha
• Diesel
• Petrol
• Lubricating Oils

Your Benefits

• High operational safety due to vibration resistance
• Space saving installation without requirement of straight inlet and outlet paths
• Easy to install without restriction either horizontally, vertically or inclined
• High operational safety due to integral safety filter in the meter inlet. Reduces effort on start-up

Meters for heavy fuel oil should have a nominal diameter of DN 20 or larger

All threaded meters from 1/2″DN15, to 1.5″DN40 are supplied complete with BSP threaded Brass Adaptors, which enable the meter to be removed easily should it require inspection / testing. These fittings also enable the meter to be orientated in the desired plane. These fittings are not available for 2″DN50 Meters. Fittings shown below;

IMPORTANT – All meters must be fitted with a pre-filter of 100 Microns, Maximum. Ingress of particles over 100 microns may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty. Oilybits can supply Inline Brass Y-Strainers with a cage supported 100 Micron Stainless Steel Mesh cloth, prices at foot of lising.

Jual Flowmeter Air Limbah

https://flowmeterjakarta.com/product/water-meter-amico-lxsg-65-e/